Cart

How to Load Dr Bonkers Soundlab® Impulse Response (IR) Cab WAV Files Into Your Favorite Hardware Modeler?

How to Load Dr Bonkers Soundlab® Impulse Response (IR) Cab WAV Files Into Your Favorite Hardware Modeler?

Since I am getting questions from users every day regarding how to load impulse response (ir) wave files of my guitar and bass cabs into their favorite modeler or hardware IR loader I will update this list regularly as needed. Remember you will want to start off first loading the WAV files (unless otherwise noted below) of my HypeReal™ or Choice mix files (which are captured with 500ms length frequency sweeps and truncate down using all manufacturers’ IR loading software). If either types of IR mixes don’t suit your needs, find the mic mixes you like best and explore those single mic files in my packs. If you need instructions for a modeler not listed here or that is not available elsewhere on my site, please let me know in the comments and I will dig up the info for you!

Happy playing,

Dr B

Instructions for loading Dr Bonkers Soundlab® impulse response (IR) guitar or bass cab WAV Files into your Mooer® Radar™

What you want to do is use the files contained in the folders marked 44.1K 24B (these are WAV files that are 44.1KHz 24Bit). Further instructions may be found in the manufacturer’s manual file found in this link on page 15: http://www.mooeraudio.com/file/Radar_Manual_EN_V011531312026193-241.html

Instructions for loading Dr Bonkers Soundlab® impulse response (IR) guitar or bass cab WAV Files into your Strymon® Iridium™

What you want to do is use the files contained in the folders marked 96K 24B (these are WAV files that are 96KHz 24Bit) and 500 ms (all my cab mix files use 500 ms files as source). Further instructions may be found in the manufacturer’s site here: https://www.strymon.net/faq/using-strymon-impulse-manager-with-iridium/

PLEASE NOTE: Strymon normalizes their guitar cab IR files to -6 dBFS whereas Dr Bonkers Soundlab normalizes bass and guitar cab IR files to -0.03 dBFS, so the Dr Bonkers cab files will be noticeably louder than Strymon stock cabs. If that volume jump bothers you, then you will need to bulk process peak normalize the desired Dr Bonkers files to -6 dBFS. The fact that Strymon is the only modeler that does this and does not allow an adjustment in their software is a bit of a head scratcher.

Instructions for loading Dr Bonkers Soundlab® impulse response (IR) guitar or bass cab WAV Files into your Boss® GT-1000 ™

What you want to do is use the files contained in the folders marked either 44.1K 24B (these are WAV files that are 44.1KHz 24Bit), 48K 24B (these are WAV files that are 48KHz 24Bit), or 96K 24B (these are WAV files that are 96KHz 24Bit). Further instructions may be found in the manufacturer’s info found in this link: https://www.boss.info/us/promos/gt-1000_ultimate_guide/#contents20

Instructions for loading Dr Bonkers Soundlab® impulse response (IR) guitar or bass cab WAV Files into your Boss® WAZA Tube Amp Expander™

What you want to do is use the files contained in the folders marked either 44.1K 24B (these are WAV files that are 44.1KHz 24Bit), 48K 24B (these are WAV files that are 48KHz 24Bit), or 96K 24B (these are WAV files that are 96KHz 24Bit). Further instructions may be found in the manufacturer’s info found in this link: https://www.boss.info/us/support/by_product/waza_tube_amp_expander/owners_manuals/8a7c9560-f561-47e0-91d2-f477ff243df0/

Instructions for loading Dr Bonkers Soundlab® impulse response (IR) guitar or bass cab WAV Files into your Line 6® Helix™

What you want to do is use the files contained in the folders marked 48K 24B (these are WAV files that are 48KHz 24Bit). Further instructions may be found in the manufacturer’s video found here: https://youtu.be/J-btObekOyg

Instructions for loading Dr Bonkers Soundlab® impulse response (IR) guitar or bass cab WAV Files into your Line 6® Helix™

What you want to do is use the files contained in the folders marked 48K 24B (these are WAV files that are 48KHz 24Bit). Further instructions may be found in the manufacturer’s pdf found here on page 26: https://line6.com/data/6/0a020a4107835d2fac0e63b03/application/pdf/Powercab%20Manual%20-%20English%20.pdf

Instructions for loading Dr Bonkers Soundlab® impulse response (IR) guitar or bass cab WAV Files into your Line 6® Pod Go™

What you want to do is use the files contained in the folders marked 48K 24B (these are WAV files that are 48KHz 24Bit). Further instructions may be found in the manufacturer’s pdf found here on page 20.

Instructions for loading Dr Bonkers Soundlab® impulse response (IR) guitar or bass cab WAV Files into your Fractal Audio Systems® AX8™

What you want to do is use the files contained in the folders marked 48K 24B (these are WAV files that are 48KHz 24Bit). Further instructions may be found in the manufacturer’s pdf found here on page 57: http://www.fractalaudio.com/downloads/manuals/AX8/AX8-Owners-Manual.pdf

Instructions for loading Dr Bonkers Soundlab® impulse response (IR) guitar or bass cab WAV Files into your Fractal Audio Systems® AXE-FX III™

What you want to do is use the files contained in the folders marked 48K 24B (these are WAV files that are 48KHz 24Bit). Further instructions may be found in the manufacturer’s pdf found here on page 179: http://www.fractalaudio.com/downloads/manuals/axe-fx-3/Axe-Fx-III-Owners-Manual.pdf

Instructions for loading Dr Bonkers Soundlab® impulse response (IR) guitar or bass cab WAV Files into your Fractal Audio Systems® AXE-FX II™

What you want to do is use the files contained in the folders marked 48K 24B (these are WAV files that are 48KHz 24Bit). Further instructions may be found in the manufacturer’s pdf found here on page 159: http://www.fractalaudio.com/downloads/manuals/axe-fx-2/archive/Axe-Fx-II-Owners-Manual-102.pdf

Instructions for loading Dr Bonkers Soundlab® impulse response (IR) guitar or bass cab WAV Files into your InMusic Systems® HeadRush® Pedal Board

What you want to do is use the files contained in the folders marked either 44.1K 32B (these are WAV files that are 44.1KHz 32Bit), 48K 32B (these are WAV files that are 48KHz 32Bit), or 96K 32B (these are WAV files that are 96KHz 32Bit). Further instructions may be found in the manufacturer’s info found in this link on page 32: https://www.headrushfx.com/assets/downloads/Pedalboard%20-%20User%20Guide%20-%20v2.1.1.pdf

Instructions for loading Dr Bonkers Soundlab® impulse response (IR) guitar or bass cab WAV Files into your Atomic Amps® Amplifire, Amplifire 6™, or Amplifire 12™

What you want to do is use the files contained in the folders marked 48K 32B (these are WAV files that are 48KHz 32Bit). Further instructions may be found in the manufacturer’s pdf found here: https://atomicamps.com/wp-content/uploads/2018/10/ATM_AmpliFire-Manual-6.0-1Final.pdf

Instructions for loading Dr Bonkers Soundlab® impulse response (IR) guitar or bass cab WAV Files into your Yamaha® THR100H™ or THR100HD™

What you want to do is use the files contained in the 500 ms sub folders marked in the folders labeled 44.1K 32B (these are WAV files that are 44.1KHz 32Bit). Further instructions may be found in the manufacturer’s pdf found here: https://usa.yamaha.com/files/download/other_assets/5/808305/THR_HD_H_Utility_OM_E_Web.pdf

Instructions for loading Dr Bonkers Soundlab® impulse response (IR) guitar or bass cab WAV Files into your NUX® Cerberus™

What you want to do is use the files contained in the folders marked 44.1K 24B (these are WAV files that are 44.1KHz 24Bit). Further instructions may be found in the manufacturer’s manual file found in this link: http://www.nuxefx.com/index.php?m=content&c=index&a=show&catid=72&id=272

Instructions for loading Dr Bonkers Soundlab® impulse response (IR) guitar or bass cab WAV Files into your Two Notes Engineering® Torpedo™ C.A.B.™, Wall Of Sound™ (WOS™), and their other products.

What you want to do is use the files contained in the folders marked either 44.1K 24B (these are WAV files that are 44.1KHz 24Bit) or 96K 24B (these are WAV files that are 96KHz 24Bit). Further instructions may be found in the manufacturer’s info found in this link by clicking on the appropriate manual pdf: http://wiki.two-notes.com/doku.php?id=start or https://www.two-notes.com/wall-of-sound

Instructions for loading Dr Bonkers Soundlab® impulse response (IR) guitar or bass cab WAV Files into your Diezel® VHX™

What you want to do is use the files contained in the folders marked 96K 32B or 44.1K 32B (these are WAV files that are 48KHz 24Bit). Further instructions may be found in the manufacturer’s pdf found here on page 16: https://www.diezelamplification.com/manuals/en/VHX_OM_2_00.pdf#page=16

Instructions for loading Dr Bonkers Soundlab® impulse response (IR) guitar or bass cab WAV Files into your Diezel® VHX™

What you want to do is use the files contained in the folders marked 48K 24B (these are WAV files that are 48KHz 24Bit). Further instructions may be found in the manufacturer’s pdf found here on page 13: https://www.suhr.com/wp-content/uploads/2019/02/Reactive-Load-I.R.-User-Guide-2_13_2019.pdf

Instructions for loading Dr Bonkers Soundlab® impulse response (IR) guitar or bass cab WAV Files into your Suhr® PT-15 IR™

What you want to do is use the files contained in the folders marked 48K 24B (these are WAV files that are 48KHz 24Bit). Further instructions may be found in the manufacturer’s pdf found here on page 15: https://www.suhr.com/wp-content/uploads/2019/07/PT-15-IR-User-Guide-011927.pdf

Instructions for loading Dr Bonkers Soundlab® impulse response (IR) guitar or bass cab WAV Files into your Suhr® PT-15 IR™

First you will want to Firmware V c63 that you can find here.

Follow the instructions with the firmware. You will want to use my mono files that are 44.1 KHz 16 Bit for the best results.

Instructions for loading Dr Bonkers Soundlab® impulse response (IR) guitar or bass cab WAV Files into your AMT Electronics® Pangea CP-100FX™

What you want to do is use the files contained in the folders marked 48K 24B (these are WAV files that are 48KHz 24Bit). Further instructions may be found in the manufacturer’s pdf found here on page 24: https://amtelectronics.com/new/manuals/Pangaea-CP-100FX-Users-Guide-Rev-A-ENG.pdf

Instructions for loading Dr Bonkers Soundlab® impulse response (IR) guitar or bass cab WAV Files into your Warwick® RockBoard MOD 5 – Cab SIM + DI Patchbay™

What you want to do is use the files contained in the folders marked 44.1K 24B (these are WAV files that are 44.1KHz 24Bit). If you are using single mic files, you will want to use 200ms version. Further instructions may be found in the manufacturer’s pdf found here on page 10: https://shop.warwick.de/media/pdf/21/92/2b/RBO_B_MOD5_Manual_ENEQA9qVfZXKozi.pdf

Instructions for loading Dr Bonkers Soundlab® impulse response (IR) guitar or bass cab WAV Files into your Yerasov® IRon Cab Impulse Response Cabinet Simulator™

What you want to do is use the files contained in the folders marked 48K 24B (these are WAV files that are 48KHz 24Bit). If you are using single mic files, you will want to use 200ms version. Further instructions may be found in the manufacturer’s pdf found here on page 2: http://yerasov.com/sites/default/files/images/manual_ir_on.pdf

Instructions for loading Dr Bonkers Soundlab® impulse response (IR) guitar or bass cab WAV Files into your Poly Effects® Poly Digit™Delay Reverb Touch Screen Modular Pedal 

What you want to do is use the files contained in the folders marked 48K 24B (these are WAV files that are 48KHz 24Bit). If you are using single mic files, you will want to use 200ms version. Further instructions may be found in the manufacturer’s pdf found here on page 12: https://storage.googleapis.com/poly_effects1/Digit%20Manual.pdf